arXiv:2606.12040v3 Announce Type: replace
Abstract: The design of reinforced concrete (RC) highway barriers is a safety-critical engineering task that requires strict compliance with regulatory provisions such as the AASHTO LRFD Bridge Design Specifications. Current engineering practice relies largely on manual, iterative, and experience-driven procedures to satisfy complex material, geometric, and mechanical constraints. Although standalone large language models (LLMs) show strong capabilities in knowledge representation and text generation, their direct use in structural engineering design is limited by hallucination, numerical reasoning errors, and insufficient integration with physics-based analysis. To address these limitations, this study proposes a "generation-validation-modification" closed-loop framework for automated RC barrier design based on the multi-agent orchestration capability of AutoGen. The framework integrates specialized agents for parameter generation, mechanics-based calculation, target-interval evaluation, deviation diagnosis, and rule-based design modification. The multi-agent framework (MAF) was evaluated on three barrier testing levels (TL-3, TL-4, and TL-5) using sixty RC barrier designs with different geometric configurations. Three DeepSeek models with different parameter scales, DS-8B, DS-32B, and DS-671B, were investigated. All designs were evaluated according to Section 13 of the AASHTO LRFD Bridge Design Specifications, 10th Edition (2024). Results show that MAF-DS-8B achieves a target-interval compliance rate of 98.3%, while the best-performing standalone LLM, DS-32B, achieves 11.7%. These results demonstrate that multi-agent architectures can improve the reliability, interpretability, and accessibility of AI-assisted engineering design for practical applications.
Abstract: The design of reinforced concrete (RC) highway barriers is a safety-critical engineering task that requires strict compliance with regulatory provisions such as the AASHTO LRFD Bridge Design Specifications. Current engineering practice relies largely on manual, iterative, and experience-driven procedures to satisfy complex material, geometric, and mechanical constraints. Although standalone large language models (LLMs) show strong capabilities in knowledge representation and text generation, their direct use in structural engineering design is limited by hallucination, numerical reasoning errors, and insufficient integration with physics-based analysis. To address these limitations, this study proposes a "generation-validation-modification" closed-loop framework for automated RC barrier design based on the multi-agent orchestration capability of AutoGen. The framework integrates specialized agents for parameter generation, mechanics-based calculation, target-interval evaluation, deviation diagnosis, and rule-based design modification. The multi-agent framework (MAF) was evaluated on three barrier testing levels (TL-3, TL-4, and TL-5) using sixty RC barrier designs with different geometric configurations. Three DeepSeek models with different parameter scales, DS-8B, DS-32B, and DS-671B, were investigated. All designs were evaluated according to Section 13 of the AASHTO LRFD Bridge Design Specifications, 10th Edition (2024). Results show that MAF-DS-8B achieves a target-interval compliance rate of 98.3%, while the best-performing standalone LLM, DS-32B, achieves 11.7%. These results demonstrate that multi-agent architectures can improve the reliability, interpretability, and accessibility of AI-assisted engineering design for practical applications.
This article has been indexed from cs.AI updates on arXiv.org
Read the original article: